Canon Mk1500, Руководство пользователя, Страница: 37 / 119

33
Basic Operations
Part 2
Print
Once the characters have been input, begin printing.
1
Press [Print/Print option].
The print media selection display appears.
“No ribbon cassette” is displayed if the ribbon cassette is not installed. Install the
ribbon cassette.
“No ribbon information. No ribbon amount displayed. Press enter” is displayed if
the information cannot be read due to the ribbon cassette failure and so forth. If this
message is displayed, follow the instruction on the screen.
What is “print media”?
Print media is the material that you are printing on, such as a tube, heat shrink tube,
label tape, wrap around tape, 4mm I.D. strip, or clear tube.
•
2
Press [
◄
] or [
►
] to select “1:Tube”, and then press [Enter].
The tube size (inner diameter) selection display appears. •
3
Press [
◄
] or [
►
] to select “2:
φ
3.0mm”, and then press [Enter].
Select the correct tube size
Printing will not be performed correctly if you do not select the
correct tube size.
The sets to print display appears.
Rough amount of the remaining ink ribbon is displayed as shown. When the
information of the cassette is not properly retrieved, the amount of the ribbon does not
appear.
•
4
Press [4] and [Enter].
The result of this operation is that the character data for three
pages is printed four times. •
5
Confirm the location of the leading end of the loaded tube, press
[
◄
] or [
►
] to select the appropriate input side, and press [Enter].
If the leading end of the loaded tube is at the transport roller 2, select [IN], and if its at
the cutter side, select [OUT].
If a wrong side is selected, media will be used wastefully.
Canceling printing
If you press [Cancel], the message “Aborting print” appears and
printing is aborted. In this case, the tube that is currently being
printed is cut and then ejected.
6
Take out the tube.
A half-cut tube is ejected.
If a tube jams
Hold down [Cancel] until the printer beeps. The
printer stops all operations immediately. In this
case, the tube is not cut and it is not ejected. Refer
to “If a Tube or Label Tape Becomes Jammed”
( page 90) and take out the jammed tube.
•
The tube is half-cut to permit easy cutting by hand.