Canon ME200S-SH, Инструкция по эксплуатации

Страница: 29 / 80

Shooting Video
29
Left side and center of the screen
Right side of the screen
NOTES
• Press the CANCEL button to stop showing the camera's onscreen displays on the shooting screen;
press the button again to show all onscreen displays again.
• For external monitors that support only 480P or 576P input, connect the camera using the HDMI
OUT teminal.
• When the output signal is 480P or 576P, onscreen displays will not be superimposed on the video
signal.
• Onscreen displays will not be superimposed on the video signal output from the 3G/HD-SDI 2
terminal. To output onscreen displays, use the 3G/HD-SDI 1 / MONITOR terminal or HDMI OUT
terminal.
Display Description Custom Display
ABCDEFGHIJKLMNOP Camera name (
A
66 ). [Camera Name]
AF, C. AF Autofocus operation (
A
43, 45).
• [AF] appears only while the one-shot AF function
is being used.
• When [C. AF] appears in red, continuous AF has
stopped working or cannot be used.
[Continuous AF]
([C. AF] display only)
CP1 to CP 6 , EOS, WDR, C.Log Currently selected custom picture file (
A
52). [Custom Picture]
Temp. (in red) Temperature warning (
A
6 7). [Temperature Warning]
Fan (in red) Fan warning (
A
6 7). –
Lens (in red) Lens error warning (
A
6 7). [Lens Error]
AWB, WB-A, WB-B, Dylt, Tung, Kelv
00000K, ±0 White balance (
A
3 9 ). [White Balance]
Auto, Manual Camera mode (
A
31). [Camera Mode]
F0.0, Clsd Aperture value (
A
33).
• [Clsd] (fully closed iris) appears only when a
compatible CINE-SERVO lens (
A
71) is
attached to the camera.
[Iris]
00.0dB Gain value (
A
3 6 ). [Gain]
Display Description Custom Display
Date/time Date and time. [Date/Time]
Gen. Genlock (
A
5 9 ). –
Rec Recording command being output to an external
recorder (
A
57).
–
1/0000 Shutter speed (
A
37). [Shutter Speed]
ND Off, ND 1/8, ND 1/ 6 4 ND filter setting (
A
38). [ND Filter/Infrared]
IR Infrared mode (
A
48). [ND Filter/Infrared]