background image

27

ENGLIS

H

Connecting a monitor

If you want to view your presentation close-up on a monitor as well as on the screen, you can connect the 

MONITOR-OUT

 signal output jack on the projector to an external monitor.

To connect the projector to a monitor:

1.

Take the supplied Computer cable and connect one end to the D-Sub output terminal of the computer.

2.

Connect the other end of the Computer cable to the 

COMPUTER-1

 signal input terminal of the 

projector.

3.

Take another Computer cable and connect one end to the monitor and the other end to the 

MONITOR-OUT

 output terminal of the projector.

4.

If you wish to make use of the projector speaker in your presentations, take a suitable audio cable and 
connect one end of the cable to the audio output terminal of the computer, and the other end to the 

AUDIO IN

 terminal of the projector.

5.

If you wish, you can use another suitable audio cable and connect one end of the cable to the 

AUDIO 

OUT

 terminal of the projector, and the other end to your external speakers (not supplied).

Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See 

"Adjusting the sound" on page 47

 for details.

The final connection path should be like that shown in the following diagram:

Images may not be displayed correctly depending on the type of the input signal and the type of the 

cable.

Connecting Video source devices

You can connect your projector to various Video source devices that provide any one of the following 

output sockets:

HDMI/MHL

Component Video

S-Video

Video (composite)

You need only connect the projector to a Video source device using just one of the above connecting 

methods, however each provides a different level of video quality. The method you choose will most 

likely depend upon the availability of matching terminals on both the projector and the Video source 

device as described below:
HDMI (High-Definition Multimedia Interface) supports uncompressed video data transmission between 

compatible devices like DTV tuners, DVD players and displays over a single cable. It provides pure 

digital viewing experience. See 

"Connecting an HDMI device" on page 28

 for how to connect the 

projector to an HDMI device.
Digital TV tuner and DVD players output Component Video natively, so if available on your devices, this 

should be your connection method of choice in preference to (composite) Video. See 

"Connecting a 

Component Video source device" on page 29

 for how to connect the projector to a component video 

device.
If you have both composite Video and S-Video output terminals on your Video source device, you should 

elect to use the S-Video option. Se

"Connecting an S-Video source device" on page 30

 for how to 

connect the projector to an S-Video device.

Notebook or desktop computer

Computer cable (supplied)

Audio cable (option)

Speakers

Monitor

Computer cable

Audio 

cable 

(option)

Содержание LX-MU500






















































































Отзывы: