SERIAL FUNCTIONAL SPECIFICATION Page 11 of 18
7.30. ON Start Disable Command
Command
“C29” [CR]
Detail
Clear to Power ON Start
This status is stored in EEPROM, so even if turning off and on.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.31. Power Management Ready Command
Command
“C2A” [CR]
Detail
Set Power Management to Ready
This status is stored in EEPROM, so even if turning off and on.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.32. Power Management OFF Command
Command
“C2B” [CR]
Detail
Set Power Management to OFF mode.
This status is stored in EEPROM, and even if turning OFF and ON.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.33. Power Management Shut Down Command
Command
“C2E” [CR]
Detail
Set Power Management to Shut down mode.
This status is stored in EEPROM, and even if turning OFF and ON.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.34. D.Zoom + Command
Command
“C30” [CR]
Detail
Moving on to Digital Zoom mode and make the screen image bigger.
This command works the same as the Remote control’s “D.ZOOM UP” button.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.35. D.Zoom - Command
Command
“C31” [CR]
Detail
Moving on to Digital Zoom mode and make the screen image smaller.
This command works the same as the Remote control’s “ZOOM DOWN”
button.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]