SERIAL FUNCTIONAL SPECIFICATION Page 10 of 18
7.24. Menu OFF Command
Command
“C1D” [CR]
Detail
Clear Menu of On Screen Display
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.25. Display Clear Command
Command
“C1E” [CR]
Detail
Clear the On Screen Display
Clear the On screen Display unconditionally
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.26. Brig Command
Command
“C20” [CR]
Detail
Brightness of user c1
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.27. Brightness - Command
Command
“C21” [CR]
Detail
Brightness of user control -1
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.28. Image (Toggle) Command
Command
“C27” [CR]
Detail
Switch Image setting status.
This command works the same as the remote control’s “Image” button.
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]
7.29. ON Start Enable Command
Command
“C28” [CR]
Detail
Set to Power ON Start
This status is stored in EEPROM, so even if turning off and on..
Acceptable
[ACK] [CR]
Response
Unacceptable “?” [CR]