![background image](http://html1.mh-extra.com/html/canon/lv-8225/lv-8225_user-manual_4126710054.webp)
54
Setting
Capture
Capture
This function enables you to capture an image being
projected to use it for a starting-up display or interval of
presentations.
Select
Capture
and press the OK button.
A confirmation box appears and select
Yes
to capture
the projected image.
After capturing the projected image, go to the Logo
select function and set it to
User
. Then the captured
image will be displayed the next time you turn on the
projector or when you press the BLANK button (p 9).
To cancel the capture function, select
Yes
in the "Quit?"
confirmation box.
Note:
• Before capturing an image, select
Standard
in the Image select Menu to
capture a proper image (pp. 35,44).
• A signal from a computer can be captured
up to XGA (104 x 768). A signal from video
equipment can be captured except for
720p
,
1035i
, and
1080i
. (Only for LV-790,
LV-795, LV-7390)
• A signal from a computer can be captured
up to WXGA (180 x 800). A signal from
video equipment can be captured except
for
1035i
and
1080i
. (Only for LV-85)
• When capturing the image that has been
adjusted by the Keystone function, the
adjusted data is automatically reset and
the projector captures an image without
keystone correction.
• When Logo PIN code lock function is set to
On
,
Logo select
and
Capture
can not be
selected.
• When starting to capture a new image, the
previously stored image is cleared even if
you cancel the capturing.
• When there is no captured image or it is
interrupted while capturing an image,
User
can not be selected, you can only switch
between
Default
and
Off
.
Logo PIN code lock
This function prevents an unauthorized person from
changing the screen logo.
Off
........... The screen logo can be changed freely
from the Logo Menu (p. 53).
On
............ The screen logo cannot be changed
without a Logo PIN code.
If you want to change the
Logo PIN code lock
setting,
press the OK button and the Logo PIN code dialog box
appears. Enter a Logo PIN code by following the steps
below. The initial
Logo PIN code
is set to “431” at the
factory.
Logo PIN code lock
Содержание LV-8225
Страница 1: ...MULTIMEDIA PROJECTOR User s Manual ...