Canon LEGRIA FS405, Инструкция по эксплуатации

Страница: 106 / 125

106 Š
Additional Information
- A memory card error occurred. The camcorder cannot record or display the image. Try
removing and reinserting the memory card, or use a different memory card.
- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory
card ( 28).
- If after the message disappears, appears in red, perform the following: Turn off the
camcorder and remove and reinsert the memory card. If turns back to green you can
resume recording/playback. If the problem persists, save your recordings ( 79) and ini-
tialize the memory card ( 31).
Could not add the scene(s) to the playlist
- One or more scenes could not be added to the playlist. The playlist can contain a maximum
of 99 scenes. Delete some scenes from the playlist ( 64).
Do not disconnect the USB cable or the power source until you safely end the connection
from the computer. Connect the compact power adapter
- When the camcorder is in mode and is connected to the computer with the supplied
USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source
while this message appears may result in permanent loss of the recordings in the cam-
corder. Use the computer’s Safely Remove Hardware function to end the connection and dis-
connect the USB cable before using the camcorder.
File name error
- The folder and file numbers have reached their maximum value. Set [Photo Num-
bering] to [Reset] and delete all the photos on the memory card ( 72) or initialize it
( 31).
Initialize only using the camcorder
- There is a problem with the file system that prevents accessing the selected memory. Initial-
ize the memory with this camcorder ( 31).
May not be possible to record movies on this memory card
- You inserted a memory card without a Speed Class rating. Replace the memory card with
one rated Speed Class 2, 4, 6 or 10.
Mem. Card Number of scenes already at maximum
- The memory card already contains the maximum number of scenes (3,999 scenes); no fur-
ther scenes can be copied onto the memory card. Delete some scenes ( 45) to free some
space.
Mem. Card Unable to recognize the data
- The memory card contains scenes recorded using a video configuration that is not supported
(NTSC). Play back the recordings in the memory card with the device originally used to
record them.
Memory card cover is open
- After inserting a memory card, close the memory card slot cover ( 30).
COP
Y