background image

Class II equipment
Moving parts: Keep body parts away from moving 

parts

CAUTION: An electrical shock may occur. Remove all 

the power plugs from the power outlet.

There are sharp edges. Keep body parts away from 

sharp edges.

[NOTE]

Some of symbols shown above may not be 

affixed depending on the product.

Consumables

WARNING

Do not dispose of used toner cartridges in open 

flames. Also, do not store toner cartridges or 

paper in a location exposed to open flames. This 

may cause the toner or paper to ignite, and result 

in burns or fire. 

Notice

Product Name

Safety regulations require the product's name to 

be registered. 

In some regions where this product is sold, the 

following name(s) in parentheses ( ) may be 

registered instead. 

LBP228x / LBP226dw / LBP223dw (F176500)

EMC requirements of EC Directive

This equipment conforms with the essential EMC 

requirements of EC Directive. We declare that this 

product conforms with the EMC requirements of 

EC Directive at nominal mains input 230 V, 50 Hz 

although the rated input of the product is 220 to 

240 V, 50/60 Hz. Use of shielded cable is necessary 

to comply with the technical EMC requirements 

of EC Directive.

EU WEEE and Battery Directives

You can see the WEEE and Battery Directives 

information in the latest User's Guide (HTML 

manual) from the Canon website (https://oip.

manual.canon).

Wireless LAN Regulatory Information

Regulatory information for users in Jordan

LBP228x / LBP226dw / LBP223dw includes 

approved Wireless LAN Module (Model name: 

AW-NM333).

Contains Wireless LAN Module approved by TRC/

SS/2018/181

Regulatory information for users in Russia

Подтверждение соответствия Минкомсвязи 

России: Декларация соответствия № 

Д-МДРД-5398 от 28.05.2018 года, действительна 

до 28.05.2024 года, зарегистрирована в 

Федеральном агентстве связи 07.06.2018

Regulatory information for users in UAE

LBP228x / LBP226dw / LBP223dw includes 

approved Wireless LAN Module (Model name: 

AW-NM333).

TRA
REGISTERED No: ER63428/18
DEALER No: DA0060877/11

•  Do not modify, pull, forcibly bend, or perform any 

other act that may damage the power cord. Do not 

place heavy objects on the power cord. Damaging the 

power cord may result in a fire or electrical shock.

•  Do not plug in or unplug the power plug with wet 

hands, as this may result in an electrical shock.

•  Do not use extension cords or multi-plug power strips 

with the machine. Doing so may result in a fire or 

electrical shock.

•  Do not wrap the power cord or tie it in a knot, as this 

may result in a fire or electrical shock.

•  Insert the power plug completely into the AC power 

outlet. Failure to do so may result in a fire or electrical 

shock.

•  Remove the power plug completely from the AC 

power outlet during a thunder storm. Failure to do so 

may result in a fire, electrical shock, or damage to the 

machine.

•  Make sure that the power supply for the machine is 

safe, and has a steady voltage.

•  Keep the power cord away from a heat source; failure 

to do this may cause the power cord coating to melt, 

resulting in a fire or electrical shock.

Avoid the following situations:

If excessive stress is applied to the connection part of the 

power cord, it may damage the power cord or the wires 

inside the machine may disconnect. This could result in a 

fire.

•  Connecting and disconnecting the power cord 

frequently.

•  Tripping over the power cord.

•  The power cord is bent near the connection part, and 

continuous stress is being applied to the power outlet 

or the connection part.

•  Applying excessive force on the power plug.

CAUTION

Install this machine near the power outlet and leave 

sufficient space around the power plug so that it can be 

unplugged easily in an emergency.

Handling

CAUTION

Laser Safety

This product is confirmed as a Class 1 laser product in 

IEC60825-1:2014 and EN60825-1:2014.
CLASS 1 LASER PRODUCT

LASER KLASSE 1

APPAREIL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LÁSER DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KLASS 1
The laser beam can be harmful to human bodies. Since 

radiation emitted inside the product is completely 

confined within protective housings and external covers, 

the laser beam cannot escape from the machine during 

any phase of user operation. Read the following remarks 

and instructions for safety.

•  Never open covers other than those instructed in the 

manuals for this machine.

•  If the laser beam should escape and enter your eyes, 

exposure may cause damage to your eyes.

•  Use of controls, adjustments, or performance of 

procedures other than those specified in this manual 

may result in hazardous radiation exposure.

Laser Safety Caution

Safety-Related Symbols

Power switch: “ON” position
Power switch: “OFF” position
Power switch: “STAND‐BY” position

Push‐push switch 

“ON” 

“OFF”

Protective earthing terminal
Dangerous voltage inside. Do not open covers other 

than instructed.
CAUTION: Hot surface. Do not touch.

Important Safety Instructions

This manual describes only warnings and cautions for the 

installation and the power supply. Be sure to read 

"Important Safety Instructions" described in the User's 

Guide also.

WARNING

Indicates a warning concerning operations that may 

lead to death or injury to persons if not performed 

correctly. To use the machine safely, always pay 

attention to these warnings.

CAUTION

Indicates a caution concerning operations that may 

lead to injury to persons if not performed correctly. 

To use the machine safely, always pay attention to 

these cautions.

IMPORTANT

Indicates operational requirements and restrictions. 

Be sure to read these items carefully to operate the 

machine correctly and avoid damage to the machine 

or property.

Installation

To use this machine safely and comfortably, carefully read 

the following precautions and install the machine in an 

appropriate location.

WARNING

Do not install in a location that may result in a fire or 

electrical shock

•  A location where the ventilation slots are blocked (too 

close to walls, beds, sofas, rugs, or similar objects)

•  A damp or dusty location

•  A location exposed to direct sunlight or outdoors

•  A location subject to high temperatures

•  A location exposed to open flames

•  Near alcohol, paint thinners or other flammable 

substances

Other warnings

•  Do not connect unapproved cables to this machine. 

Doing so may result in a fire or electrical shock.

•  Do not place necklaces and other metal objects or 

containers filled with liquid on the machine. If foreign 

substances come in contact with electrical parts inside 

the machine, it may result in a fire or electrical shock.

•  If any foreign substance falls into this machine, unplug 

the power plug from the AC power outlet and contact 

your local authorized Canon dealer.

CAUTION

Do not install in the following locations

The machine may drop or fall, resulting in injury.

•  An unstable location

•  A location exposed to vibrations

Other cautions

•  When carrying this machine, follow the instructions in 

this manual. If carried improperly, it may fall, resulting 

in injury.

•  When installing this machine, be careful not to get 

your hands caught between the machine and the 

floor or walls. Doing so may result in injury.

Avoid poorly ventilated locations

This machine generates a slight amount of ozone and 

other emissions during normal use. These emissions are 

not harmful to health. However, they may be noticeable 

during extended use or long production runs in poorly 

ventilated rooms. To maintain a comfortable working 

environment, it is recommended that the room where the 

machine operates be appropriately ventilated. Also avoid 

locations where people would be exposed to emissions 

from the machine.

Power Supply

WARNING

•  Use only a power supply that meets the specified 

voltage requirements. Failure to do so may result in a 

fire or electrical shock.

•  The machine must be connected to a socket-outlet 

with grounding connection by the provided power 

cord.

•  Do not use power cords other than the one provided, as this 

may result in a fire or electrical shock.

•  The provided power cord is intended for use with this 

machine. Do not connect the power cord to other 

devices.

Appendix

20

En

Содержание LBP228x

































Отзывы: