Canon LBP-3260, Руководство по обслуживанию

Страница: 205 / 234

c. Itemize the Data Set
Select SET UP with the DISPLAY/SET UP switch. Various settings and commands can be made
according to the DATA SET (see table 4-8-4).
For example, when commanding a test print pick-up, delivery tray allocation or pattern set-
ting operation, follow the steps below by operating the the tester. (when you want to have paper
picked-up from the multi-purpose tray, duplex-print a horizontal line test print pattern and
deliver it through the face up tray.)
1) When the printer has entered standby mode, set the DISPLAY/SET UP switch on the tester
to "SET UP".
2) Set the MODE SELECT to "8".
3) Set DATA SET switch bit 8 to 0, bit 7 to 1, bit 6 to 0, bit 5 to 0, bit 4 to 1, bit 3 to 1, bit2 to
0 and bit 1 to 1 (see Table 4-8-7).
4) Press the ENTER switch.
5) By turning the TEST PRINT switch ON once, a test print can be made.
Figure 4-8-6
Notes: 1. After setting a test print in this mode, the data will remain the same even if the test
print is set in another mode.
2. By keeping the TEST PRINT switch "ON", continuous test prints will be made.
3. When setting the image pattern to "All black", do not make duplex prints.
4 - 45
CHAPTER 4
DATA
DATA SET
bit 16 bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1
DC24V
bit 2
1
0
bit 3
1
0
bit 4
1
0
bit 5
1
0
bit 6
1
0
bit 7
1
0
bit 8
1
0
ENTER
TEST
PRINT MODE SELECT
ON
OFF
1
DISPLAY
SET UP
2
3
4
5
6
7
8
9
10
11
CANON INC.
MADE IN JAPAN
RY9-0104
PRINTER DRIVER
bit 1
1
0
➀ ➁ ➂ ➃ ➄
Horizontal lines (image pattern) setting
Duplex print setting
Face-up tray delivery allocation
Multi-purpose tray pick-up allocation