Canon L1, Руководство по обслуживанию

Страница: 23 / 80

2-12
2-12
2
2
Technology
Technology
Dust detection control
Overview
The timing of dust detection is as follows.
[2] [1] [2] [2] [3] [3]
Start key
ON
Before stream
reading
1st sheet
scanned
2nd sheet
scanned
Between
sheets
After scan Standby
[1] White plate dust detection control
[2] Steam reading glass / Scanning glass dust detection control,
Dust detection correction control (continuous lines)
[3] Dust detection correction control (noncontinuous lines)
Scanner unit
(DADF)
- White plate dust detection
- Stream reading glass dust detection
- Dust detection correction (continuous lines)
- Dust detection correction (noncontinuous lines)
Scanner unit
(Reader)
- White plate dust detection
- Scanning glass dust detection
- Dust detection correction (continuous lines)
- Dust detection correction (noncontinuous lines)
■
White plate dust detection control
In this machine, the fans cool down the inside of the DADF to prevent the overheating at
stream reading operation. As a result, dust in the DADF may stick to the white plate and it
may cause the lines on the image.
To reduce the in
fl uence from the dust, the white plate dust detection and correction are per-
formed.
(1) White plate dust detection
The machine compares the shading coef
fi cient obtained from shift shading and the shading
coef fi cient obtained from fi xed shading to identify the presence/absence of dust and, if any,
identi fi es the coordinates and width of the area.
(2) White plate dust correction
If the machine detects the dust as a result of white plate dust detection, it interpolates the
shading coef
fi cient of the area using the shading coef fi cient of both sides so as to decrease
the effects of the presence of dust. It executes the shading correction using the shading coef-
fi cient obtained after the interpolation.
When the dust is detected as a result of white plate dust detection, the machine interpolates
the shading coef
fi cient of the dust area using the shading coef fi cient of both sides so as to
reduce the effects of the dust. The shading correction is executed after the interpolation.
[Detection Algorithm]
[Correction Algorithm]
Computation of shading
coefficient
(shift shading to
reference area) Computation of shading
coefficient
(from fixed shading to
shading correction position)
Detection of coordinates of
start of dust and width
Correction of dust area
coefficient using data of both sides
Fixing shading position
Shading correction position
Reference area
(Shading coefficient
White plate
Area
of dust
Comparison
■