Canon iR3300 Series Скачать руководство пользователя страница 241

Страница: 241 / 362

List of Error Messages

6-29

rou

les

hoo

tin

Remove the original from the platen glass.

Cause

The original remains on the platen glass.

Remedy

Remove the original from the platen glass, and place the original again.

Remove the original from the feeder.

Cause

The original is placed both in the feeder and on the platen glass in specified mode
with which the feeder cannot be used.

Remedy

Remove the original from the feeder.

No toner.

Cause

There is not enough toner left to print.

Remedy

Add toner, using the toner cartridge recommended for use in this machine.
(See ‘Adding Toner,’ on p. 5-9.)

Содержание iR3300 Series











































































































































































































































































































































































Результаты поиска

Содержание iR3300 Series

Отзывы:

Canon iR3300 Series, Справочное руководство, Страница: 241 / 362

Результаты поиска

Содержание iR3300 Series

Отзывы: