Canon iR3300 Series, Справочное руководство, Страница: 120 / 362

Setting Specifications That Are Common to Each Function (Common Settings) 3-10 3-10 3-10 3-10
3 3 3 3
Se
lec
ti
ng
and
Sto
ring
Se
tti
ngs
to
S
ui
t yo
u
r
Nee
d
s
Selecting the Default Display After Auto Clear Selecting the Default Display After Auto Clear Selecting the Default Display After Auto Clear Selecting the Default Display After Auto Clear
You can select which screen to display after Auto Clear has taken place.
NOTE
••••
The duration for Auto Clear can be set. (See “Setting the Time Taken for the Display to Return to the
Basic Features Screen After Finishing Operations,” on p. 3-37.)
••••
The default setting is “Initial Function.”
1 1 1 1
Call up the desired screen as follows:
Call up the desired screen as follows: Call up the desired screen as follows:
Call up the desired screen as follows:
2
2 2
2
Select the “Initial Function” or “Selected Function,” and press “OK.” Select the “Initial Function” or “Selected Function,” and press “OK.” Select the “Initial Function” or “Selected Function,” and press “OK.” Select the “Initial Function” or “Selected Function,” and press “OK.”
To display the screen set under Initial Function after Auto Clear is performed, press “Initial Function.”
For example, if Copy is set under Initial Function and Auto Clear is performed after setting the Mail Box
function, the display returns to the Copy Basic Features screen.
To display the screen before Auto Clear was performed, press “Select Function.” For example, if Copy
is set under Initial Function and Auto Clear is performed after setting the Mail Box function, the display
returns to the Mail Box Selection screen.
3 3 3 3
Press “Done.”
Press “Done.” Press “Done.”
Press “Done.”
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.