Canon iR3300 Series Скачать руководство пользователя страница 240

Страница: 240 / 362

List of Error Messages

6-28

rou

les

hoo

tin

Remove the paper from the output tray.

Cause

Prints from the previous job remain in the output tray.

Remedy

Remove the prints from the output trays.

Attach the finisher to the main unit.

Cause

The finisher is not properly connected to the main unit.

Remedy

Connect the finisher to the main unit properly.

Paper is jammed in the indicated location.
Remove the jammed paper.

Cause

An original jam or paper jam has occurred, preventing you from making prints.

Remedy

Remove paper from the machine following the guidance messages on the touch
panel display. (See ‘Clearing Paper Jams,’ on p. 6-2.)

Waste toner is full.

Cause

The waste toner box is filled with waste toner.

Remedy

Contact your service representative.

Add toner.

Cause

There is little toner left and you can print only a few more pages.

Remedy

Add toner using the toner cartridge recommended for use in this machine. (See
‘Adding Toner,’ on p. 5-9.)

Place the original on the platen glass.

Cause

The programmed function (mode) requires the original to be placed on the platen
glass.
There is no original on the platen glass.

Remedy

Place the original on the platen glass.

Содержание iR3300 Series











































































































































































































































































































































































Результаты поиска

Содержание iR3300 Series

Отзывы:

Canon iR3300 Series, Справочное руководство, Страница: 240 / 362

Результаты поиска

Содержание iR3300 Series

Отзывы: