Canon iR C6800 Series, Руководство по обслуживанию

Страница: 796 / 1404

Chapter 11
11-6
5) Clean the copyboard glass and the reading glass.
6) Make test copies.
7) Make sample copies.
8) Check the operation of the leakage breaker.
With the power switch at ON, push the test switch of the leakage breaker to see that it operates normally (i.e., the
breaker switch shifts to the OFF side to cut off the power).
If the leakage beaker fails to operate normally, replace it, and run a check once again.
<Resetting the Breaker>
When you have made the check, turn off the main power switch, and turn on the breaker switch, and then turn the
main power switch back on.
9) Put the sample copies in order, and clean up the area around the machine.
10) Record the final counter reading; at this time, be sure to fill out the blanks for 'FXUPRL' and 'DVUNTK'
(service counters).
11) Fill out the Service Book, and report to the person in change. Be sure to update the history of checks on the
leakage breaker in the Service Book.
11.3.2 Scheduled Servicing (reader unit)
0003-4139
Do not use solvents or oils other than those indicated herein.
T-11-4
The foreign values are estimates only, and are subject to change based on future data.
Unit Location Work Intervals Remarks
Original exposure system Copyboard glass clean 195,000 images clean the face, back, and the
white plate on the back.
Original exposure system ADF reading glass clean 195,000 images clean the back and the face.
Original exposure system Scanner rail clean/
lubricate
as needed
Original exposure system Scanner mirror
(No. 1 through No. 3 mirrors)
clean 195,000 images
Original exposure system Reflecting plate clean 195,000 images