Canon iR C6800 Series, Руководство по обслуживанию

Страница: 1048 / 1404

Chapter 14
14-64
14.4.3
Jam Code (ADFrelated)
0005-6303
T-14-99
Code Sensor Sensor Description
0001 postseparation sensor PI7 The post separation sensor does not detect paper even when paper has been fed
452 mm after the start of separation.
0002 postseparation sensor PI7 the separation sensor detects paper after paper has been fed 50 mm (if extra
length, +200 mm) 45.5 mm following registration pickup.
the sensor goes on (paper with hole) before paper has been fed 12 mm after the
detection of the trailing edge; the separation sensor detects paper after paper has
been fed 50 mm from when the separation senor has gone on.
0003 registration sensor PI1 the registration sensor does not detect paper even when paper has been fed
134.8 mm after the postseparation sensor has gone on.
0004 registration sensor PI1 the read sensor goes off before the registration sensor goes off.
0005 read sensor PI8 the read sensor does not detect paper when paper has been fed 364.2 mm (182.1
x 2) after the point of registration.
the read sensor does not detect paper even when paper has been fed 157.4 mm
(78.7 x 2) from the point of No. 2 registration.
0006 read sensor PI8 the read sensor detects paper when paper has been fed 500 mm (if extra length,
+200 mm) from the start of feed following a temporary stop before reading.
in the course of LTRR/LGL identification in mix mode, the read sensor detects
paper when paper has been fed 514 mm beginning at the advance edging
standby position.
0007 delivery reversal sensor PI9 at time of switchback, the delivery sensor does not detect paper when paper has
been fed 50 mm from the start of feed.
at time of switchback, the delivery sensor does not detect paper after paper has
been fed 50 mm from the start of feed.
0008 delivery reversal sensor PI9 delivery reversal sensor
the delivery sensor detects paper after paper has been fed 161.9 mm from the
end of reading the trailing edge.
0042 postseparation sensor PI7 a jam (1st sheet) is detected by the postseparation sensor.
0043 registration sensor PI1 paper (1st sheet) fails to reach the registration sensor.
0044 registration sensor PI1 a stationary jam (1st sheets) is detected by the registration sensor.
0045 read sensor PI8 paper (1st sheet) fails to reach the read sensor.
0046 read sensor PI8 a stationary jam (1st sheet) is detected by the read sensor.
0047 delivery reversal sensor PI9 paper (1st sheet) fails to reach the delivery sensor.
0048 delivery reversal sensor PI9 a stationary jam (1st sheet) is detected by the delivery sensor.
0071 timing fault timing of software operation is faulty.
0073 timing fault the shift motor has a fault.