Canon iR C6800 Series, Руководство по обслуживанию

Страница: 430 / 1404

Chapter 7
7-164
3) Fix the torque limiter [2] in place using a screw [1].
If you fail to fix the torque limiter in place, the
rotary will lose balance when any of the color
developing units is removed, possibly damaging the
photosensitive drum or the color developing
assembly.
F-7-535
4) Push the lever [1] of the developing rotary solenoid
once; then, rotate it counterclockwise by hand so that
you have access to the color developing unit you are
replacing.
If you rotate the developing rotary clockwise with
a color developing assembly inside it, the antistray
sheet attached to the sleeve of the color developing
assembly can interfere with the photosensitive drum
and become detached. Be sure always to rotate the
developing rotary counterclockwise.
F-7-536
5) Rotate the developing rotary until the developing
cylinder [1] of the color developing unit you are
removing faces upward.
F-7-537
6) Remove the 2 screws [1], and open the developing
assembly fixing arm [2].
F-7-538
7) Hold the color developing assembly as shown in the
figure; then, lift its rear to detach at an angle [2].
Once you have detached the color developing unit,
be sure its supply mouth does NOT face down.
F-7-539
[1]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[2]
[1]
[2]