Canon IPF850 Скачать руководство пользователя

Страница: 62 / 166

•

Head Cleaning A

Use this mode if printing is faint or contains foreign substances. This method of cleaning consumes the least
amount of ink.

•

Head Cleaning B

Use this mode if no ink is ejected at all, or if

Head Cleaning A

does not solve the problem.

Important

•

Do not remove the Maintenance Cartridge or ink tanks during either

Head Cleaning A

Head Cleaning B

Ink may leak or an error may occur.

•

If printing does not improve even if you execute

Head Cleaning B

, try repeating

Head Cleaning B

once or

twice. If this still does not improve printing, the Printhead may have reached the end of its useful life. Contact
your Canon dealer for assistance.

Note

•

By default, nozzles are checked at fixed intervals.
Configure the settings on the Control Panel menu in

Nozzle Check

(See "Menu Settings.")

➔

User's Guide

Perform cleaning as follows.

On the

Tab Selection screen

of the Control Panel, press

◀

▶

to select the Settings/Adj. tab (

Note

•

If the

Tab Selection screen

is not displayed, press the

Menu

button.

Press the

button.

The

Set./Adj. Menu

is displayed.

Press

▲

▼

to select

Maintenance

, and then press the

button.

Press

▲

▼

to select

Head Cleaning

, and then press the

button.

Press

▲

▼

to select

Head Cleaning A

Head Cleaning B

, and then press the

button.

Head cleaning is now executed.

Print a test pattern to check the nozzles, and determine whether cleaning has cleared the nozzles. (See
"Checking for Nozzle Clogging.")

➔

User's Guide

Cleaning the Stacker

If the front or back surfaces of the paper are soiled, clean the Stacker.

Items to Prepare

Roll paper

An unused roll at least 254.0 mm (10.00 in) wide

Note

•

Approximately 1 m (1.09 yd) of roll paper is used by this operation.

Turn the printer and Stacker off.

Cleaning the Stacker

iPF850 Series

Basic Guide

Consumables and Maintenance

Cleaning the Printer

Содержание IPF850







































































































































































Результаты поиска

Содержание IPF850

Отзывы:

Похожие инструкции для IPF850

Бренды по названию

Популярные бренды

Canon IPF850, Основное руководство

Результаты поиска

Содержание IPF850

Отзывы:

Похожие инструкции для IPF850

Бренды по названию

Популярные бренды