5
EN
G
L
IS
H
7777
Lock the Print Head into place by
lowering the lever.
Press down the Lock Button until it clicks.
Do not touch the Lock Lever once the Print Head has
been installed.
4 Installing the Ink Tanks
• For safety reasons, store ink tanks out of the reach of small children.
• Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands.
1111
Take out the black ink tank.
2222
Hold the ink tank as shown in the
diagram and remove the Protective
Cap.
3333
Insert the black ink tank slant into the
back slot aligning the mark with the
mark.
• Do not touch the ink port.
• Do not attempt to reattach the
Protective Cap once it has
been removed.
Protective Cap
ink port
iP90_QSG_EUM_EN.fm Page 5 Tuesday, November 16, 2004 6:44 PM