manualshive.com logo in svg

Canon iP4680, Начало работы, Страница: 42 / 45

Поделиться
Скачать
Canon iP4680 Скачать руководство пользователя страница 42

0

About Consumables

Consumables (ink tanks / FINE Cartridges) are available for 5 years after 

production has stopped.

Specifications

Minimum System Requirements

 Conform to the operating system’s requirements when higher than those given 

here.

Operating System 

Processor 

RAM

Windows Vista

1 GHz processor

512 MB

Windows XP SP2

300 MHz processor

128 MB

Windows 2000 Professional 

SP4

300 MHz processor

128 MB

Note: Operation can only be

guaranteed on a PC with 

Windows Vista, XP or 2000 

pre-installed.

Mac OS X v.10.5

Intel processor, PowerPC G5, 

PowerPC G4

(867 MHz or faster)

512 MB

Mac OS X v.10.4

Intel processor, PowerPC G5, 

PowerPC G4, PowerPC G3

256 MB

Mac OS X v.10.3.9

PowerPC G5, PowerPC G4, 

PowerPC G3

128 MB

Note: Hard Disk must be 

formatted as Mac OS Extended 

(Journaled) or Mac OS 

Extended.

Browser

Internet Explorer 6.0 or later

Safari

Hard Disk Space 450 MB 

Note: For bundled software 

installation.

550 MB 

Note: For bundled software 

installation.

CD-ROM Drive

Required

Display

SVGA 800 x 600 

XGA 1024 x 768

To upgrade from Windows XP to Windows Vista, first uninstall software bundled 

with the Canon inkjet printer.

•

General Specifications

Printing resolution 

(dpi)

9600 (horizontal)* x 2400 (vertical)

* Ink droplets can be placed with a pitch of 1/9600 inch at 

minimum.

Interface

USB Port:

  Hi-Speed USB*

Direct Print Port:

  PictBridge

* A computer that complies with Hi-Speed USB standard 

is required. Since the Hi-Speed USB interface is fully 

upwardly compatible with USB 1.1, it can be used at 

USB 1.1.

Print width

8 inches / 203.2 mm 

(for Borderless Printing: 8.5 inches / 216 mm)

Acoustic noise level Approx. 45.5 dB(A)

* When printing in the standard print quality mode on 

Photo Paper Plus Glossy II.

Operating 

environment

Temperature: 5 to 35°C (41 to 95°F) 

Humidity: 10 to 90% RH (no condensation)

Storage 

environment

Temperature: 0 to 40°C (32 to 104°F) 

Humidity: 5 to 95% RH (no condensation)

Power supply

AC 100-240V, 50/60 Hz

Power consumption Printing: Approx. 14 W 

Standby (minimum): Approx. 1.3 W 

OFF: Approx. 0.5 W

External dimensions Approx. 17.0(W) x 11.7(D) x 6.0(H) inches

Approx. 431(W) x 296(D) x 153(H) mm

* With the Paper Support and Paper Output Tray 

retracted.

Weight

Approx. 5.7 kg (Approx. 12.4 lb)

* With the Print Head and ink tanks installed.

Print Head/ink

Total 4,416 nozzles (PgBK 320 nozzles, Y/DyeBK each 

512 nozzles, C/M each 1,536 nozzles)

Additional System Requirements for on-screen manuals

Browser: Easy Guide Viewer

Note: Microsoft Internet Explorer 6.0 or 

later must be installed. The on-screen 

manual may not be displayed properly 

depending on your operating system or 

Internet Explorer version. We recommend 

that you keep your system up to date with 

Windows Update.

Browser: Help Viewer

Note: The on-screen manual may not be 

displayed properly depending on your 

operating system. We recommend that 

you keep your system up to date.

Microsoft is a registered trademark of Microsoft Corporation.

Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.

Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.

Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.

•

•

•

•

Specifications are subject to change without notice.

Содержание iP4680














































Отзывы:

Нет отзывов