![Canon iP4500 - PIXMA Color Inkjet Printer Скачать руководство пользователя страница 82](http://html.mh-extra.com/html/canon/ip4500-pixma-color-inkjet-printer/ip4500-pixma-color-inkjet-printer_quick-start-manual_2553083082.webp)
78
Troubleshooting
Eight flashes: Ink absorber is almost
full.
The printer has a built-in ink absorber to hold the ink used during Print Head
Cleaning, for example.
Eight flashes indicates that the ink absorber is nearly full.
Press the
RESUME/CANCEL
button to cancel the error so you can continue
printing.
Before the ink absorber becomes completely full, contact a Canon Service
representative. (You will need to replace a particular part of the printer.)
Important
Canon recommends that you call for service as soon as this error occurs. Once
the ink absorber becomes completely full, printing cannot be performed until the
ink absorber is replaced.
Nine flashes: No response from
connected digital camera or video
camcorder. / Connected digital camera
or video camcorder is not compatible
with this printer.
Disconnect the USB cable connecting the printer and the device, and then
reconnect it.
When printing from a PictBridge compliant device, depending on the model or
brand of your device, you may have to select a PictBridge compliant print mode
on the device before connecting it to the printer. You may also have to turn on
the camera or select Play mode manually after connecting the device to the
printer. Perform necessary operations according your device’s instruction
manual before reconnecting it to the printer.
If the error is still not resolved, there is a possibility that you are using a digital
camera or digital video camcorder that is not supported by this printer. Only
PictBridge compliant devices can be connected to the printer for direct printing.
Ten flashes: Cannot perform duplex
printing.
The size of paper may not be compatible with automatic duplex printing. The
sizes of media suitable for auto duplex printing are A4, Letter, A5, and 5" x 7".
Make sure that the size of the paper loaded in the printer is correct. Pressing the
RESUME/CANCEL
button will eject the paper and restart printing from the front
side of the next paper. The reverse side of the ejected sheet will not be printed.
Eleven flashes: Automatic Print Head
Alignment failed.
Possible causes are as follows:
z
Print Head nozzles are clogged.
Press the
RESUME/CANCEL
button to dismiss the error, and print the
nozzle check pattern to check the status of the Print Head. See “Printing the
Nozzle Check Pattern” on page 35.
z
Paper of size other than A4 or Letter is loaded in the Rear Tray.
Press the
RESUME/CANCEL
button on the printer to dismiss the error, then
load two sheets of A4/Letter-sized Canon Matte Photo Paper MP-101 with
the printing side (whiter side) facing UP in the Rear Tray.
Automatic Print Head Alignment cannot be performed using paper from the
Cassette. For Automatic Print Head Alignment, always load paper in the
Rear Tray.
z
The Paper Output Slot is exposed to strong light.
Press the
RESUME/CANCEL
button to dismiss the error, and then adjust
your operating environment and/or the position of the printer so that the
Paper Output Slot is not exposed directly to strong light.
After carrying out the above measures, if the problem continues after aligning
the Print Head again, press the
RESUME/CANCEL
button to dismiss the error,
and then perform Manual Print Head Alignment. For details on Manual Print
Head Alignment, see “Manual Print Head Alignment” on page 47.
Cause
Action
Содержание iP4500 - PIXMA Color Inkjet Printer
Страница 3: ...Photo Printer Quick Start Guide series ...