INSTALLATION MANUAL ON CISS FOR PRINTER CANON IP 1500
5
IV. Take the used CISS off
During printing, if you need to take the system off, please first take off air filter,
insert back air plug, move tube valve to CLOSE position (4-1-1), Move out cartridge
holder, detach the rack (4-1-2) (can't be too rude to change the shape of rack). Take ink
cartridges out, press back the red cover at 45 degree angle (4-1-3).
Notice: If you do not close the tube valve before taking the cartridge out, or you
do not install the red cover back to cartridge, it maybe result that ink in the cartridges
will flow back to the external tank or flow out from the cartridge nozzle, these case will
damage the second normal use of system.
Pic. 4-1-1 Pic. 4-1-2 Pic. 4-1-3
V. Refill ink
During printing, if you found out that the ink level in the tank is below the red
line, please add ink according to the methods.
VI. Check air balance tube
During printing, if you find some abnormal cases, such as bad output, ink drip
out on paper, then you need to check the air balance tube to see if exist ink. If yes,
please do according to the manual of "ink pump out from balance tube”.
VII. Warnings
1. During printing, please do not take cartridges over than the printer. Please
keep ink tank and printer in the same level.
2
.
During printing, do not inverse, lift up or lower ink tanks.
3
.
Please do not block up ink tanks for curiosity or for fear of less ink
4. Use CISS at clean environment and within the temperature range 15-35
degrees.
VIII. Product Warranty
INKSYSTEM warrants its products to be free from defects in material or
workmanship. Rarely the equipment partly or completely fails within the warranty
period. In these cases we do everything possible to ensure that our customers are
satisfied with the purchase.
The INKSYSTEM CISS installation is free in any of the representative offices.
