background image

                  INSTALLATION MANUAL ON CISS FOR PRINTER CANON IP 1500

 

 

 
              Pic. 3-5-3                           Pic. 3-5-4                           Pic. 3-5-5 
 

6. Insert cartridge fixation rack 

Insert fixation rack and push upward ( 3-6-1, 3-6-2), move cartridge holder to 3-

6-3 position, check if the fixation will touch the printer body or not, this fixation can't 
be drop out, it can prevent the cartridge drop out during printing. 

 

 

 
               Pic. 3-6-1                          Pic. 3-6-2                            Pic. 3-6-3 
 

7. Test printer operation 

Move tube valve to the open position (3-7-1), use a screw or other tools to press 

down  cover  button  (3-7-2),  plug  on  power  source,  turn  the  printer  on,  check  if  the 
printer can work normal or not, check if the ink tube will touch the printer data-transfer 
wire or not. Close the printer’s cover, check if there is abnormal noise. Select printer 
maintenance option (2-1), print nozzle test sheet, if test sheet is normal (2-2), you can 
begin printing. If the line is missing (2-3), please clean printer head. If printer head is 
still wrong after cleaning, please contact your local distributor. 

 

 

 

                                             Pic. 3-7-1                                             Pic. 3-7-2 
 
 
 
 

Содержание IP 1500









Отзывы: