Canon Inner Finisher-J1, Руководство по обслуживанию

Страница: 28 / 101

• E530-8001: Rear alignment motor error
• E530-8002: Rear alignment motor error
■ Alignment Operation in Non-sort Mode
When the paper width is 297.0 mm or less (A4, LTR, etc.)
1. After the delivery sensor (PS1) detects the trailing edge of the paper, the front and rear alignment plates move to the wait
positions (paper width + 5 mm).
Rear Alignment Plate
Front Alignment Plate
End of Paper
+5 mm
Middle of Feeding Path
End of Paper
+5 mm
2. Move the front and rear alignment plates to align the paper (center alignment).
5 mm
5 mm
Rear Alignment Plate
Middle of Feeding Path
Front Alignment Plate
When the paper width is more than 297.0 mm (SRA3, 12X18)
1. After the delivery sensor (PS1) detects the paper, the front and rear alignment plates move to the wait positions (paper width
+ 20 mm and paper width + 5 mm, respectively).
Rear Alignment Plate
End of Paper
+5 mm
Middle of Feeding Path
End of Paper
+20 mm
Front Alignment Plate
2. Technical Explanation
22