Canon Inner Finisher Additional Tray-A1, Руководство по обслуживанию

Страница: 42 / 84

4
4
4-22
4-22
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the STP Move Motor/Gripper Unit Move Motor
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the STP Move Motor/Gripper Unit Move Motor
Removing the Gripper Open/Close Motor
1) Remove the gripper unit.
"Removing the Gripper Unit"(page 4-7) .
2) Remove one screw and then the cover.
3) Remove one connector and then the harness from the harness guide.
x1
F-4-59 F-4-59
4) Remove two screws and then the gripper open/close motor.
x2
F-4-60 F-4-60
Removing the STP Move Motor/Gripper Unit Move Motor
1) Remove the upper unit.
"Removing the Upper Unit"(page 4-4) .
2) Move the stapler rearward.
F-4-61 F-4-61
3) Remove the reuse band of the additional tray harness (only when the additional tray is installed).
4) Remove the reuse and of the tray harness.
5) Remove two screws.
x1 x2
F-4-62 F-4-62