Canon Inner Finisher Additional Tray-A1, Руководство по обслуживанию

Страница: 16 / 84

2
2
2-3
2-3
Technology > Basic Configuration > Outline of basic operation > Stapling operation
Technology > Basic Configuration > Outline of basic operation > Stapling operation
Stapling operation
1.Outline
Stacking the ejected paper from the host machine onto the processing tray. Stapling and
ejecting the paper stack on the stack tray.
2.Details
Outline of operation
"Angle stapling at 1 front corner", "Angle stapling at 1 rear corner" and "Double stapling (side
stitching)"
1)1) through 7) are the same operation as the offset operation.
2)Gripper conveys the paper stack to the stapling position with holding the stack.
"The operation 9) and 10) are applicale only to the front/ rear corner stapling."
9)After stapling the paper stack, the gripper starts to eject the stack on the stack tray.
10)At the same time, the stacking height detection lever moves up. The detection lever
moves down when the paper stack has ejected on the stack tray to detect the paper.
"The operation 9)' through 18) are applicable only to the double stapling (side stitching)."
9)The shift roller moves down and gives higher pressure to the paper stack. Gripper then
opens and evacuates itself to the connecting position with the stapler.
Stack tray
Shift roller
Higher nip pressure
Stapler
Gripper
Gripper evacuates
itself to the connecting position
Stack height detetion lever
[Gripper evacuating operation]
■
•
F-2-3 F-2-3
Gripper opens
Shift roller nip
Gripper evacuating
and connecting to the stapler
connecting mechanism-1
connecting mechanism-2
Gripper unit rail
Shift roller nip
[Gripper evacuating operation (Top view)]
10)When the gripper closes, the connecting lever moves downward to connect the stapler
and the gripper to each other, so the stapler can travel back and forth.
11)Stapler unit travels to its first stapling position to execute stapling.
12)Stapler unit travels to its second stapling position to execute stapling.
Stapling (first) Stapling (second)
The stapler unit and the gripper unit move with connecting
to each other and execute the stapling operation.
F-2-4 F-2-4
F-2-5 F-2-5