15
15
Installation Procedure > Installing the Inner Finisher in the Host Machine
Installation Procedure > Installing the Inner Finisher in the Host Machine
12) Attach the joint arm of the punch unit to the inner finisher. Joint 3 connectors of the punch
relay cable to the joint arm. Set the punch relay cable in the wire saddle.
NOTE:
Do not yet fix the joint arm with a screw..
x3
F-1-35
13) Fix the cable cover included in the inner puncher carton together with the joint arm. Pay
attention cable wires are not caught.
• 1 screw (RS Tightening; M3x8)
CAUTION:
Firmly insert the projection of the cable cover to a positioning hole of the joint arm.
x1
F-1-36
