13
13
Installation Procedure > Installing the Inner Finisher in the Host Machine
Installation Procedure > Installing the Inner Finisher in the Host Machine
7) Remove the metal fixtures, all the shipping tapes and the cushioning materials.
(All the removed parts and screws are no longer reused.)
NOTE:
The following order has to be upheld:
(1) Remove 3 screws to remove the 2 metal fixtures.
(2) Remove the upper packing material.
(3) Remove the lower packing material.
x3
F-1-29
8) Hold the inner finisher as shown in the figure and set it on the rail unit. Slowly push in the
finisher to the host machine till it stops so that the triangle mark of the finisher aligns with
the left edge of the reader unit.
NOTE:
On a rear view, the relational positions of the finisher and rail unit are as shown in the
figure.
F-1-30
F-1-31