Canon imageRUNNER ADVANCE C9075S PRO, Руководство пользователя

Страница: 14 / 20

End of Life; WEEE (EU-only)
The symbol "the crossed-out wheeled bin" indicates that at end-of-life of the equipment
separate collection is required in the EU Member States. The black bar specifies that the
appliance is put on the market after August 13, 2005. Reference: Directive 2002/96/EC.
Contact your local organization for further information.
RoHS (China- only)
The Environmental Protection Use Period (EPUP) applicable for the printing system
designated for deliveries to the Peoples Republic of China is 20 years. This EPUP, which
does not include consumables or expendables, does not affect any warranty that is provided
for the system and may not be construed or interpreted as a separate guarantee for the
printing system.
Energy consumption (All countries)
In order to limit energy consumption during times of non-use the PRISMAsync has a
Sleep mode during which the power level is reduced.
Power Modes and Delay Times
Energy consumption and efficiency are influenced both by the product technology and
by the settings chosen by the user, especially the delay times that are selected to enter
reduced power states. The following delay times have been pre-set.
Power Modes and Delay Times
#
Default delay time (minutes) Operational mode
20 minutes Low power
40 minutes Sleep
The modes above are automatically entered after the Default Delay Time has elapsed;
counting from the moment the last print has been produced. These settings are
recommended and for most users ensure both ease of use and low energy consumption.
The minimum and maximum values are between the brackets. The Delay Times can be
changed. Shorter delay times will lower the energy consumption even further, but may
cause longer recovery times. In some cases longer delay times may prove to be more
convenient, but it should be noted that this may cause an increase in energy consumption.
Therefore, from an energy preservation point-of-view, longer delay times are not
recommended.
Chapter 2 - Regulation notices 14
Regulation notices