manualshive.com logo in svg

Canon imagerunner advance 8205, Руководство по эксплуатации

Поделиться
Скачать
Canon imagerunner advance 8205 Скачать руководство пользователя страница 177

177

Tr

oubleshooting

5

Close the guide (F-A2).

When closing the guide, be careful not to get your fi ngers caught, as this may result in personal 
injury.

6

Remove any paper jammed in the upper cover (F-A3) of the fi nisher.

oceed to step 7.

1.  Open the upper cover (F-A3).
2.  Remove any jammed paper.

Open the upper cover slowly, as opening it too fast may result in personal injury.

Do not turn OFF the main power switch of the fi nisher when you open the upper cover (F-A3) to remove 
the jammed paper. If you do so accidentally, follow the procedures to turn OFF the main power switches of 
the attached optional equipments and the machine, and then back ON. (See “Main Power and Energy Saver 
Key,” on p. 12.)

Содержание imagerunner advance 8205









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды