Canon imageRUNNER 5055 series, Руководство по обслуживанию

Страница: 535 / 596

Chapter 17
17-39
<USER>
T-17-52
DHCP-12 Set whether or not to validate the DHCP-Option 12 request.
When the DHCP-12 switch is set to ON, an inquiry about a host name (Option 12) is made by using the DHCP-Option 55.
*DHCP (Dynamic Host Configuration Protocol)
Setting range:
0: OFF, 1: ON
Factory setting value: 1
2
DHCP-81 Set whether or not to validate the DHCP-Option 81 request.
When the DHCP-81 switch is set to ON and the dynamic DNS setting is set to ON in the user mode, dynamic change of an IP
address by DHCP Option 81 is validated.
Setting range:
0: OFF, 1: ON
Factory setting value: 1
2
USB-RCNT Set whether or not to perform automatic connection when disconnecting the USB device. (USB RECONNECT)
Setting range:
0: Do not perform automatic connection.
1: Perform automatic connection.
Factory setting value: 0
2
UI-COPY Make a setting to switch the display in the copy screen in the control panel.
This mode is available for a user who does not want to display a print job screen on the control panel.
Setting range:
0: Hide the copy screen.
1: Do not hide the copy screen.[default]
2
PP-LWRT Not used 2
COPIER > OPTION >USER
Sub-item Description Level
COPY-LIM Use it to put an upper limit to the number of copies.
setting: 1 to 9999 (default: 9999)
1
SLEEP Use it to enable/disable the sleep function.
setting
0: off
1; on (default)
1
WEB-DISP Use it to enable/disable the fixing web length warning message.
setting
0: off (do not display)
1: on (display; default)
If set to '0', the message will only be on the service mode screen.
1
W-TONER Use it to enable/disable the collecting toner case full message.
setting
0: off (do not display)
1: on (display; default)
If set to '0', the message will be only on the service mode screen.
1
COUNTER1 Use it to set soft counter 1 of the user mode screen.
101: total 1 (fixed)
1
COUNTER2 Use it to set soft counter 2 of the user mode screen.
setting: 0 to 999
1
COUNTER3 Use it to set soft counter 3 of the user mode screen.
setting: 0 to 999
1
COUNTER4 Use it to set soft counter 4 of the user mode screen.
setting: 0 to 999
1
COUNTER5 Use it to set soft counter 5 of the user mode screen.
setting: 0 to 999
1
COUNTER6 Use it to set soft counter 6 of the user mode screen.
setting: 0 to 999
1
CONTROL Not used 1
B4-L-CNT Use it to specify where B4 should be counted as large or small size for soft counters 1 thorough 6.
0: count as small size (default)
1: count as large size
1
COPY-JOB Use it to enable/disable copy job reservation with a card reader/coin vendor in use.
setting
0: enable copy job reservation (default)
1: disable copy job reservation
1
PR-PSESW Use it to enable/disable the print pause function switch.
setting
0: disable print pause function (default)
1: enable print pause function (display print output stop/resume button on user screen)
1
IDPRN-SW Use it to switch over count increment jobs for the group control counter.
0: for PRINT, increment the following: box print, report print, SEND local print, PDL print (default)
1: for PRINT, increment the following: report print, SEND local print, PDL print
1
CNT-SW Use it to switch over display of charge counter default items.
setting
0: default total 1 (101; default)
1: default total 2 (102), copy total 2 (202), total A total 2 (127)
2: default total 1 (101), total small (104), total large (103), scan total 1 (501)
1
TAB-ACC Use it to enable/disable automatic switchover of cassettes for tab (index) paper.
setting
0: do not change over between tab sheets (default)
1: change over between tab sheets
1
COPIER > OPTION > BODY
Sub-item Description Level