Canon imageRUNNER 3300 Series, Руководство пользователя

Страница: 6 / 129

Safety Information iv
Safety Information
■
A. Laser Safety
This Product complies with 21 CFR Chapter 1 Subchapter J as a Class 1 laser product
under the U.S. Department of Health and Human Services (DHHS) Radiation
Performance Standard according to the Radiation Control for Health and Safety Act of
1968. This means that the Product does not produce hazardous laser radiation.
Since radiation emitted inside the Product is completely confined within protective
housings and external covers, the laser beam can not escape from the machine during
any phase of user operation.
■
B. CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976. These
regulations apply to laser products manufactured from August 1, 1976. Compliance is
mandatory for products marketed in the United States. The label shown below indicates
compliance with the CDRH regulations and must be attached to laser products marketed
in the United States.
■
C. Additional Informaftion
When servicing the optical system of the printer, be careful not to place screwdrivers or
other shiny objects in the path of the laser beam. Also, accessories such as watches and
rings should be removed before working on the printer. The reflected beam, though
invisible, can permanently damage your eyes. The label bearig the following warning is
attached to the insides of covers where there is danger of exposure to laser radiation:
CAUTION
•
Use of controls, adjustments or performance of procedures other than those specified in the
manual may result in hazardous radiation exposure.
DANGER-
Laser radiation when open.
AVOID DIRECT EXPOSURE TO BEAM.
DANGER-
Laser radiation when open and interlock defeated.
AVOID DIRECT EXPOSURE TO BEAM.
CANON INC .
3-30-2 SHIMOMARUKO, OHTA-KU, TOKYO, JAPAN
MANUFACTURED:
THIS PRODUCT CONFORMS WITH DHHS RADIATION
PERFORMANCE STANDARD, 21 CFR CHAPTER 1 SUBCHAPTER J.