Canon imageRUNNER 1025, Основное руководство по эксплуатации

Страница: 59 / 327

Orig
inals and P
rint M
edia
2-12
Loading Paper
■
To print on the back side of preprinted
paper
Load the preprinted paper face up into the stack
bypass, as shown in the illustration below.
When the paper is loaded into the stack bypass,
the side facing down is the one printed on.
The screen for selecting the paper size appears.
Make sure that the paper stack does not exceed
the paper limit guide.
Some types of paper may not feed properly into
the stack bypass. For high quality copies, be
sure to use the paper and transparencies
recommended by Canon.
When making copies of a small document or
thick paper, etc., the copy speed may be slightly
slower than usual.
If there are instructions on the paper package
about which side of the paper to load, follow
those instructions.
If problems, such as poor print quality or paper
jams occur, try turning the paper stack over and
reload it. –
–
–
–
–
■
If you are loading envelopes into the stack
bypass:
Gently load the stack of envelopes with the
address side facing down and the fl ap side to
the left. Be sure to insert the envelopes as far as
they will go.
When you load the envelopes, arrange the stack
of envelopes on a fi rm, clean surface fi rst, then
press down fi rmly on the edges to make the
folds crisp.
5
Adjust the slide guides to the width of the
paper stack.
Make sure that the paper stack does not exceed
the paper limit guide.
Some types of paper may not feed properly into
the stack bypass. For high quality copies, be
sure to use the paper and transparencies
recommended by Canon.
When making copies of a small document or
thick paper, etc., the copy speed may be slightly
slower than usual. –
–
–