Canon imagePROGRAF TA-20, Руководство по установке

Страница: 2 / 49

1
Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
Overview of Setup Confirming the Installation Space
The illustrations in this manual using the TA-30 as an example for explanation. Note that your printer may look different from these illustrations
in some cases.
The specifications and appearance of this product are subject to change without notice.
Set up the printer using the following procedure. Note that if an error
message appears during setup or other problems occur, refer to "Responding
to Messages" on p.11.
1
Assembling the Printer Stand
Page
3
2
Installing the Printer
Page
3
3
Turning On the Printer
Page
5
4
Installing the Ink Tanks
Page
6
5
Installing the Print Head
Page
7
6
Selecting the Method of Connecting
to Your Computer
Page
9
7
Installing the Software on Your
Computer
Page
10
Loading Paper
Page
11
For Best Print Quality
Page
11
Printing From a Smartphone or Tablet
Page
11
Displaying the Online Manual
Page
11
Responding to Messages
Page
11
When installing the printer, it is recommended that you secure the following
space around the printer.
Important
●
The printer stand may not be included with the model you purchased.
■
TA-30
Required space* (W x D x H)
66.5 x 57.9 x 53.6 inches
1689 x 1470 x 1359 mm
7.9 inches
(200 mm)
23.6 inches
(600 mm)*
7.9 inches
(200 mm)
11.8 inches
(300 mm)
* When using the SD-33 printer stand
■
TA-20
Required space*** (W x D x H)
54.5 x 53.1 x 29.1 inches
1382 x 1348 x 738 mm
Required space** (W x D x H)
54.5 x 57.9 x 53.6 inches
1382 x 1470 x 1359 mm
7.9 inches
(200 mm)
7.9 inches
(200 mm)
11.8 inches
(300 mm)
23.6 inches
(600 mm)**
23.6 inches
(600 mm)***
** When using the SD-24 printer stand
*** When not using the printer stand
ENGLISH