Canon imagePRESS V900, Руководство пользователя

Страница: 103 / 141

Canon
imagePRESS V900/V800/V700 Customer Expectations Document
Revision 2 imagePRESS V900/V800/V700 Customer Expectations Document Page 103
7.28.2 SDD 2-Knife Trimmer STR6702
Item Specifications
Required Equipment
•
Front Trimmer BLT6989
• One of:
o
Long Beltstacker BST6800
o Short Beltstacker BST6900
Booklet
Size
(Length) 58
Before Trimming Bypass Trimmed
Minimum 8” (204 mm) 5.9” (150 mm) 7.2” (182 mm)
Maximum
13.4” (340 mm) 12.6” (320 mm) 12.6” (320 mm)
Booklet Width (X) Approximately 2” to 9.6” (50 mm to 245 mm)
Supported Paper
Weight
59
16 lb bond to 110 lb cover (60 to 300 g/m 2 )
Maximum Booklet
Thickness
Trimming: Up to 0.2” (5 mm)
Bypass: Up to 0.23” (6 mm)
Trim Amount Approximately 0.08” to 1.38” (2 mm to 35 mm) each side
Asymmetrical Trim Approximately ±0.59” (±15 mm)
Booklet Staple Clearance
from Top/Bottom
(Minimal)
Approximately 1.57” (40 mm)
Speed
LTRR: Up to 1,800 booklets/hour
11” x 17”: Up to 1,800 booklets/hour
Power Source 60
From the SDD BLM300C Professional Booklet Maker
Dimensions (H x W x D)
Operational: 43 3/8” x 23 5/8” x 27 1/2”
(1,110 mm x 600 mm x 700 mm)
On Pallet in Box: 61 7/8” x 47 1/4” x 31 1/2”
(1,570 mm x 1,200 mm x 800 mm)
Weight
Operational: Approximately 451.9 lb (205 kg)
On Pallet in Box: Approximately 595.2 lb (270 kg)
58 Booklet heights between 320 mm and 340 mm must be trimmed to 320 mm or less.
59 On booklets of approximately 20 sheets or more, always use cover sheets that weigh 120 g/m 2 or heavier to prevent trimming
deviations.
60 Can only be connected to an approved electrical system, which is rated at a maximum of 16 A, and is protected by circuit
breakers.