Canon imagePRESS Server B4000, Конфигурация и настройка

Страница: 81 / 128

2
In the
Self Signed Certificate
dialog box, do the following and then click
Save
. Reboot the imagePRESS Server.
a)
In the
Common Name
field, enter the hostname.
b)
In the
Organization
field, enter the name of your organization.
c)
In the
Country
field, enter the name of your country (for example, use a two-letter country code).
3
On the computer that you want the untrusted connection messages to stop appearing on, in Internet Explorer,
enter the hostname of the imagePRESS Server from step 2 on page 81 (for example, https://hostname). At the
top of the browser, click
Certificate error
.
4
In the
Certificate
dialog box, on the
General
tab, click the
Install Certificate
button.
5
In the
Certificate Import Wizard
dialog box, click
Next
and then do the following:
a)
Select
Place all certificates in the following store
. Click
Browse
.
b)
In the
Select Certificate Store
dialog box, select
Trusted Root Certification Authorities
. Click
OK
.
6 Click
Next
.
7
Click
Finish
.
If a security warning displays, click
Yes
.
A pop-up displays and lets you know that the import was successful.
8
Reopen WebTools using the hostname of the imagePRESS Server from step 2 on page 81 (for example, https://
hostname).
The URL now starts with https, the lock icon is green rather than red, and the lock icon is not crossed out.
Note: If you use the IP address rather than the hostname, the untrusted connection messages still appear. You
must use the hostname name.
Start Configure from Command WorkStation
You must be logged in as Administrator and have access to Command WorkStation to access Fiery Setup Wizard.
1
In Command WorkStation, as Administrator, do one of the following:
•
Select
Server
>
Configure
.
•
In
Device Center
, on the
General
or
Users
tab, click
Configure
.
2
If the
Fiery Setup
dialog box displays, click
Configure
.
If you have not completed initial setup, you may want to click
Fiery Setup Wizard
instead. For more information,
see About Fiery Setup Wizard on page 82.
If you use the Fiery Setup Wizard (from Command WorkStation or WebTools) and click
Finish
at the end of the
wizard, the
Fiery Setup
dialog box does not display again in any location.
Configuration and Setup
Setting up from a client computer
81