manualshive.com logo in svg

Canon imagePRESS Server B4000, Конфигурация и настройка

Поделиться
Скачать
Canon imagePRESS Server B4000 Скачать руководство пользователя страница 110

Jobs not affected by Secure Erase

When you enable Secure Erase, the feature does not apply to a deleted job depending on whether Secure Erase is

enabled, where the jobs are located, and how the jobs are submitted.
Secure Erase does not apply to jobs in the following circumstances:

•

Jobs deleted before Secure Erase is turned on

•

Jobs located in systems other than the imagePRESS Server:

•

Copies of a job that are sent to another imagePRESS Server (such as load balancing)

•

Copies of a job that are archived to media or network drives

•

Copies of a job that are located on user computers

•

Pages of a job that are merged or copied entirely into another job (for example, Fiery Impose jobs or PDFs that

are otherwise merged)

•

Jobs submitted through the following methods:

•

FTP server

•

SMB connection

•

Portions of a job that are written to disk because of disk swapping and disk caching

Additionally, note the following about Secure Erase:

•

Job Log entries are not deleted unless the administrator uses the Clear Server feature to delete the entire Job Log.

•

If the imagePRESS Server is manually powered off before the deletion of a job is finished, the job may not be fully

deleted. To determine whether job deletion has finished, verify the status in Command WorkStation.

Printing from a USB flash drive

You can save PS, EPS, PCL, TIFF, and PDF files to a USB flash drive and print those files on the imagePRESS Server.

To print files automatically when you connect the USB flash drive to the imagePRESS Server, save the files to specific

folders or to the root level on the USB flash drive.
You can print Microsoft Office files (Word, Excel, and PowerPoint) from a USB flash drive if 

Enable Native

Document conversion using PrintMe 

is selected (in Configure, see 

RIP

 > 

Native Documents)

.

When you connect the USB flash drive to the imagePRESS Server, files copied to the Print, Hold, and Direct folders

are downloaded to the corresponding print connection on the imagePRESS Server.
Files copied to the root level of the USB flash drive (and any folder below the root level that is not named for a print

connection) are downloaded to the queue that you configured for USB printing.
For more information about printing from a USB flash drive, see 

Printing

, which is part of the user documentation

set.

Configuration and Setup

Administration

110

Содержание imagePRESS Server B4000

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды