manualshive.com logo in svg

Canon IMAGEPRESS C7010VPS, Руководство по эксплуатации

Поделиться
Скачать
Canon IMAGEPRESS C7010VPS Скачать руководство пользователя страница 31

The operator attention light

Introduction

The operator attention light on top of the printer helps you to monitor the status of the printer
from a distance. The colors of the lights match the printer status that the dashboard displays.

Illustration

[7] The operator attention light

Status colors

The status colors of the operator attention light

Color

Description

Red

The machine has stopped, for example because a required media
type is not available or an error has occurred.
Operator attention is required now.

Orange

The machine will stop soon, for example because more paper is
required.
Operator attention is required soon.
The orange light illuminates when the machine reaches the warn-
ing time. The warning time is a time you can set to determine
when the orange light must illuminate. You can set the warning
time in the [System] section of the operator panel.
By factory default, the warning time is set to 10 minutes. So 10 mi-
nutes before operator attention is required, the orange light will il-
luminate.

Green

The machine is busy printing. The machine can print longer than
the set warning time.
Operator attention is not required.

All lights off

The machine is idle. There are no jobs scheduled for printing.

The operator attention light

Chapter 2 - Main parts

31

Содержание IMAGEPRESS C7010VPS








































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды