Canon imageFORMULA ScanFront 400, Руководство по установке и эксплуатации

Страница: 14 / 108

14
Chapter 1 Before Use
■
The supplied power cord set is intended for use
with this scanner only. Do not use it with other
electronic equipment. In addition, do not use
power cord sets other than the one supplied with
the scanner. Doing so may result in fire or electric
shock.
■
Never connect the power cord when your hands
are wet.
■
Do not connect the scanner to a multiplug power
strip.
■
Do not knot or coil the power cord, as this may
result in a fire or electric shock. When connecting
the power cord, make sure that the power plug is
securely and completely inserted into the power
outlet.
■
Never try to take the scanner apart or modify it in
any way.
■
Never try to take the AC adapter apart or modify it
in any way, as this is dangerous and may lead to a
fire or electric shock.
■
Do not use flammable aerosol sprays near the
scanner.
■
When cleaning the scanner, turn the power OFF
and disconnect the power cord from the power
supply.
■
Clean the scanner using a slightly dampened cloth
which has been well wrung out. Never use alcohol,
benzene, paint thinner, or any other flammable
substances.
■
If the scanner makes strange noises, or gives off,
smoke, heat, or strange odors, or the scanner
does not function or other abnormalities occur
when you use the machine, immediately turn the
power OFF, and disconnect the power plug from
the power outlet. Then, contact your local
authorized Canon dealer or service representative
for further information.
■
Do not drop the scanner, or subject it to impact or
strong shock. Should the scanner ever become
damaged, immediately turn the power OFF, and
disconnect the power plug from the power outlet.
Then, contact your local authorized Canon dealer
or service representative to have the unit serviced.
■
Before moving the scanner, make sure to turn the
power OFF, and disconnect the power plug from
the power outlet.
CAUTION
■
Do not install the scanner on a surface that is
unstable or tilted, or in an area subject to
excessive vibrations, as this may cause the
scanner to fall, resulting in personal injury or
damage to the scanner.
■
Do not block the ventilation openings. Doing so
could cause the scanner to overheat, creating a
risk of fire.