Canon imageFORMULA ScanFront 400, Руководство по установке и эксплуатации

Страница: 13 / 108

Chapter 1 Before Use
13
❏
Power
●
Connect only to a power outlet of the rated voltage
and power supply frequency (either 120 V, 60 Hz
or 220-240 V, 50/60 Hz, depending on your
region).
●
Do not connect other electrical equipment to the
same power outlet to which the scanner is
connected. Also, when using an extension cord,
make sure that the extension cord is rated for the
current requirements of the scanner.
●
Never try to disassemble the AC adapter or modify
it in any way, as this is extremely dangerous.
●
The power cord and AC adapter may become
damaged if they are often stepped on or if heavy
objects are placed on them. Continued use of a
damaged power cord and AC adapter can lead to
an accident, such as a fire or electrical shock.
●
Do not use the power cord while it is coiled.
●
Do not pull directly on the power cord. When
disconnecting the power cord, grasp the plug and
remove it from the outlet.
●
Keep the area around the power plug clear of
objects so that the power cord can be
disconnected easily in an emergency.
●
Use only the AC adapter provided with this
scanner. Also, do not use the AC adapter provided
with the scanner with any other electrical devices.
Model: MG1-5039
●
If you have any questions regarding the power
supply, contact your local authorized Canon dealer
or service representative for further information.
❏
Moving the Scanner
●
When moving the scanner, always hold it with both
hands to avoid dropping it. The weight of the
scanner unit is approximately 9.92 lbs (4.5 kg).
●
Before moving the scanner, make sure the
document tray is closed and the interface cable
and AC adapter are disconnected. If the scanner is
transported with these items connected, the plugs
and connectors may be damaged due to
excessive force applied to them during movement.
❏
Handling
WARNING
Note the following precautions whenever using the
scanner. Failure to do so may result in a fire or
electric shock.
■
Never use alcohol, benzene, paint thinner, aerosol
sprays, or any other highly flammable substance
near the scanner.
■
Do not cut, damage, or modify the power cord or
AC adapter. Do not place heavy objects on the
power cord or AC adapter, and do not pull or
excessively bend the power cord.