Canon imageFORMULA P-208II Скачать руководство пользователя страница 60

Страница: 60 / 124

4-2

CANON P-208 FIRST EDITION

CHAPTER 4 INSTALLATION & MAINTENANCE

3. Installing the Software

Install the following software from the

supplied setup disk that is required in order

to use the scanner.

• CaptureOnTouch

• Scanner driver

• Others

Note:

If "CaptureOnTouch Lite" is used, the

above software does not need to be

installed.

Note:

The software should be installed be-

fore connecting the machine to a

computer.

The following shows an outline of the

installation on Windows.

1) Login using an account with Administrator

privileges.

2) Before installing the software, exit all other

applications.

3) Load the setup disk into the DVD drive of

the computer.

4) The setup menu starts automatically.

5) Click [Typical Installation].

Figure 4-101

Finish the installation by following the

on-screen messages.

4. Connecting to a Computer

1) Close the pickup tray and turn the Auto

Start switch "OFF".

2) Connect the machine and the computer

using the supplied USB cable.

Figure 4-102

3) Open the pickup tray and verify that the

power is switched ON.

Note:

The scanner cannot be used when it is

connected to a computer via a

bus-powered USB hub. A self-powered

USB hub can be used, but operation is

not guaranteed.

Содержание imageFORMULA P-208II




























































































































Результаты поиска

Содержание imageFORMULA P-208II

Отзывы:

Canon imageFORMULA P-208II, Руководство по обслуживанию с каталогом запчастей, Страница: 60 / 124

Результаты поиска

Содержание imageFORMULA P-208II

Отзывы: