54
6
Lower the securing lever for the feed roller until it clicks
into place.
About the Canon imageFORMULA
Driver Setting Tool
What is Canon imageFORMULA Driver
Setting Tool?
The Canon imageFORMULA Driver Setting Tool can be used to check
the information of the scanner, or to configure the maintenance
settings.
Canon imageFORMULA Driver Setting Tool consists of the following
tabs.
[Information] tab
You can check the firmware’s version information and scanner
information.
[Maintenance] tab
You can reset the counter of the roller, or carry out the shrinkage rate
control.
[Control] tab
You can carry out the control settings of hardware and drivers, and
perform the read or write of the control settings.
From the configuration of the hardware, you can set the automatic
power-off function.
[Diagnostic] tab
You can output or delete the log file.
Start-up of the Canon imageFORMULA
Driver Setting Tool
Click the Start button, then click [Canon DR-M140II Series] - [Canon
imageFORMULA Driver Setting Tool] in that order. Canon
imageFORMULA Driver Setting Tool will start.