Canon imageCLASS D661 Скачать руководство пользователя страница 22

Страница: 22 / 82

2-7

Loading Envelopes in the Multi-purpose Tray

• The recommended envelopes are US COMMERCIAL 10, MONARCH, EUROPEAN DL, ISO-B5,

ISO-C5, YOGATA #4 or YOGATA #2 envelopes. Using other envelopes may affect the quality of the
copy image.

NOTE

Paper Handling

Arrange the stack of envelopes on a firm,
clean surface, and press down firmly on the
edges to make the folds crisp.

• Press all the way around the envelopes to remove

any curls and expel air from inside the envelopes.
Also, press firmly on the area that corresponds to
the edges of the back flap.

Remove any curling from the envelopes by
holding the edges diagonally and bending
them gently.

Run a pen or other rounded object along
the back flaps to flatten them.

• The flaps should not bulge more than 0.2 inch

(5 mm).

Insert the stack of envelopes into the multi-
purpose tray

, and adjust the slide guides

to fit the size of the envelope

• Position the envelopes with the print side up (flaps

should not be visible) and load the envelope so
that the right edge (stamp side) feeds first in the
multi-purpose tray.

• If the envelope to be loaded has a flap on the short

edge, this edge must enter the machine first. Not
loading it this way will result in paper jams.

• Make sure the stack does not exceed the paper

limit guide.

• The machine is now ready to print.

• The orientation of a document and the

loading position of the envelope are
reversed.

• To select the type of envelope to be loaded

in the multi-purpose tray, follow the
procedure below:

Press

Additional Functions

, then

select:

COMMON SETTINGS

MP TRAY PAPERSIZE

OFF

SET ON LOADING

Load the envelope into the multi-purpose
tray, and select

ENVELOPE

, then press

Set

Use

(–)

(+)

to select the type of

envelope (

US COMMERCIAL 10

MONARCH

EUROPEAN DL

ISO-B5

ISO-C5

YOGATA #4

YOGATA

) then press

Set

NOTE

Flap

Содержание imageCLASS D661



















































































Результаты поиска

Содержание imageCLASS D661

Отзывы:

Похожие инструкции для imageCLASS D661

Бренды по названию

Популярные бренды

Canon imageCLASS D661, Справочное руководство

Результаты поиска

Содержание imageCLASS D661

Отзывы:

Похожие инструкции для imageCLASS D661

Бренды по названию

Популярные бренды