manualshive.com logo in svg

Canon Image Reader-A1, Руководство по обслуживанию, Страница: 52 / 916

Поделиться
Скачать
Canon Image Reader-A1 Скачать руководство пользователя страница 52

COPYRIGHT © 2001 CANON INC. 

2000 2000 2000 2000

 CANON iR5000i/iR6000i REV.0 JUNE 2001

CHAPTER 2 MAIN CONTROLLER

2-2 S

1.2 Outline of Electrical Circuitry

1.2.1 Outline

The major mechanism of the controller block are controlled by the CPU on the main con-

troller PCB. The CPU, such ICs as RAM and DIMM used in association with the CPU, and
hard disk drive have the following functions:

1.2.2 Main Controller PCB

T02-102-01 List of Control Items

1.2.3 Hard Disk Drive

Name

CPU
RAM

RAM
DIMM-ROM

Description

• Controls image processing of input image data from the reader unit.
• Controls image processing of output image data to the printer unit.
• Controls the hard disk drive.
• Controls the network interface, DMA controller, PCI interface, and ROM-

RAM interface.

• Controls the RAM interface.
• Temporarily stores program data and image data.
• Stores the system control program.
• Stores the boot program.

T02-102-02

Name

HDD

Description

• Stores the system software.Box
• Stores image data as part of the box function.

Содержание Image Reader-A1





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов