manualshive.com logo in svg

Canon Image Reader-A1, Руководство по обслуживанию, Страница: 232 / 916

Поделиться
Скачать
Canon Image Reader-A1 Скачать руководство пользователя страница 232

COPYRIGHT © 2001 CANON INC. 

2000 2000 2000 2000

 CANON iR5000i/iR6000i REV.0 JUNE 2001

CHAPTER 3 LASER EXPOSURE SYSTEM

3-6 P

3. Laser Driver Circuit

3.1 Controlling the Laser

The laser driver circuit serves to drive the semiconductor laser in response to the laser

drive signal (LD) from the DC controller PCB.

The following are control items associated with the laser driver circuit:

1. Turning on/off laser light.
2. Controlling the intensity of laser light (ACP control).
3. Controlling the intensity of laser light to suit the surface potential of the drum.

The following signals are used:

[1] Laser drive signal.
[2] Sample laser activation signal. Used to turn on laser light for an intensity sample (for

each scan).

[3] Laser enable signal. Goes ‘0’ when the laser becomes ready after the Start key has been

pressed.

[4] Laser write start signal. Used to start a laser write when paper reaches the laser write

start sensor (PS28), mounted in front of the registration roller.

[5] The intensity of laser light is monitored while it is turned on to collect a sample; an ap-

propriate value is fed back to the laser drive circuit.

[6] The output is controlled so that the reference value from the DC controller (EEPROM)

and the value returned as feedback will be identical.

[7] Laser intensity reference signal. Used as the laser activation reference value, and is de-

termined by potential control (EEPROM).

Содержание Image Reader-A1





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов