Canon i900D Series, Руководство по обслуживанию

Страница: 33 / 52

2. CLEANING MODE AND AMOUNT OF INK PURGED
To prevent printing problems due to bubbles, dust, or ink clogging, print head cleaning is performed for all
colors before the start of printing, except in the following cases:
- Cleaning on arrival:
Performed when the access cover is closed.
- Cleaning by dot count: Performed after ejection of paper.
- Manual cleaning / deep cleaning: Performed manually.
<Cleaning mode list>
Black: Pigment-based black
Color: Dye-based black, cyan, magenta, yellow
Condition Details
Amount of
ink used (g)
Est. required
time (sec.)
On arrival of the printer
First and second cleaning after shipped from
the plant.
1.94 70
Dot count cleaning
When the specified number of dots are
printed from the previous black/color
cleaning. (Cyan and magenta dots are
counted by large and small nozzles
separately.)
Timer cleaning - 1
If 120 to 336 hours have elapsed since the
previous cleaning till the start of the next
printing.
0.76 40
Timer cleaning - 2
If 336 hours or more have elapsed since the
previous cleaning till the start of the next
printing.
1.35 55
If the print head was not
been capped at power-on
At ink tank replacement
1.35 55
At print head replacement When the print head is removed and installed. 1.94 70
Manual cleaning
- Via the operation panel
- Via the printer driver
0.76 40
Deep cleaning
- Via the operation panel
- Via the printer driver
1.35 55
2 - 4