Printing Maintenance
29
1
Ensure that the printer is on.
2
Open the Printer Utility dialog box.
(1)
Select Page Setup
Page Setup
Page Setup
Page Setup... in the File
File
File
File menu.
(2)
Click Utilities
Utilities
Utilities
Utilities to open the Printer Utility
Printer Utility
Printer Utility
Printer Utility dialog box.
3
Start Print Head Cleaning.
(3)
Select the ink nozzles to be cleaned, and then click OK
OK
OK
OK.
(4)
When the confirmation message is displayed, click OK
OK
OK
OK.
Important
Do not perform any other operations until the print head
cleaning finishes. This takes about 50 seconds.
Note
z
Print head cleaning can be performed also from the printer itself.
Ensure that the printer is on. Hold down the Resume
Resume
Resume
Resume button until the
Power
Power
Power
Power lamp flashes once.
z
After print head cleaning finishes, print the nozzle check pattern to
verify that the print head nozzles are clean.
See "Printing the Nozzle Check Pattern
Printing the Nozzle Check Pattern
Printing the Nozzle Check Pattern
Printing the Nozzle Check Pattern" on page 26.
If the problem persists, perform print head deep cleaning.
See "Print Head Deep Cleaning
Print Head Deep Cleaning
Print Head Deep Cleaning
Print Head Deep Cleaning" on page 30.
(1)
Select Cleaning
Cleaning
Cleaning
Cleaning
from the pull-
down menu.
(2)
Click Cleaning
Cleaning
Cleaning
Cleaning.
