Canon GP405 Скачать руководство пользователя страница 443

Страница: 443 / 682

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

14-25

CHAPTER 14 TROUBLESHOOTING

Executing WHITE-ME

1) Place five sheets of standard white paper, and close the feeder or the copyboard cover.

•

Be sure that the paper is A4 or larger and placed vertically.

2) Start service mode, and select COPIER>FUNCTION-DNS>WHITE-ME.
3) Press the Copy Start key.

•

The scanner moves forward and reads the white paper.

Figure 14-230

Executing PD-DENS

1) Select COPIER>FUNCTION>DENS>PD-DENS, and press the OK key.

•

A 15-graduation patter will be generated. (The patches are black.)

Executing PD-ME

1) Remove the white paper from the copyboard, and place the PD-DENS output on the

copyboard.
•

Place the printed side down (for reading the pattern).

•

Place the white side as the leading edge and the black side toward the center.

•

Be sure to place originals against the marking V on the copyboard glass.

White paper

Figure 14-231

In practice, place
it so that the printed
side is down.

PD-DENS output

Содержание GP405






































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание GP405

Отзывы:

Бренды по названию

Популярные бренды

Canon GP405, Руководство по обслуживанию

Результаты поиска

Содержание GP405

Отзывы:

Бренды по названию

Популярные бренды