manualshive.com logo in svg

Canon GP405, Руководство по обслуживанию

Поделиться
Скачать
Canon GP405 Скачать руководство пользователя страница 225

COPYRIGHT © 1999 CANON INC.

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

7-63

CHAPTER 7  PICK-UP/FEEDING SYSTEM

5) Close the delivery assembly, and shift the

delivery assembly lower cover to remove.

Caution:

The delivery assembly lower cover
cannot be removed unless the delivery
assembly is closed. Be sure to free the
hook, and then close the lever assembly.

6) Disconnect the connector [5].
7) Open the delivery assembly, and remove

the screw [7]; then, detach the cable from
the copier (both rear and front).

Figure 7-237

8) Pull out the spacer [8] from the right side

of the delivery assembly.

9) Release the bushing [9] by shifting it to

the left.

Figure 7-238

10) Shift the delivery assembly to the right,

and detach its left and then its right.

•

When mounting the delivery assembly
connector cover 9, be sure that it will not
interfere with the spring 10 of the lower
feeding assembly.

[5]

[6]

[7]

2

Detach.

Shift.

[8]

[9]

1

[9]

[10]

Figure 7-238-1

Содержание GP405











































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды