manualshive.com logo in svg

Canon GP405, Руководство по обслуживанию

Поделиться
Скачать
Canon GP405 Скачать руководство пользователя страница 336

CHAPTER 10  EXTERNALS/AUXILIARY MECHANISMS

10-28

COPYRIGHT © 1999 CANON INC.

CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

4. Laser Scanner Motor Cooling Fan
•

FM5

1) Open the front cover.
2) Remove the inside cover.
3) Disconnect the connector [1], remove the

wire saddle [2], and remove the screw;
then, detach the laser scanner motor
cooling fan (FM5) together with its cover.

Figure 10-534

Caution:

When mounting the fan, be sure that the
marking (arrow indicating the direction
of air current) and the marking on the fan
will match.

•

FM6

1) Open the front cover.
2) Release the feeding assembly lever and

the developing assembly lever.

3) Remove the screw [1], and detach the

drum cartridge [2].

Figure 10-535

4) Disconnect the connector [3], and remove

the screw [4]; then, slide out the drum
cartridge stay [5] to the front.
(At this time, take care so that the rear of
the stay will not come into contact with
the developing cylinder.)

Figure 10-536

[5]

[1]

[2]

[3]

[4]

[1]

[2]

[5]

[3]

[3]

[4]

Содержание GP405











































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды