Canon GP335, Руководство по обслуживанию, Страница: 150 / 200

CHAPTER 4 SERVICE MODE
4-82
<DISPLAY>
FEEDER
Level 1
FEEDSIZE
REf. Description
Displays the size of original detected by the feeder.
e.g., A4, LTR.
<ADJUST>
Level 3
DOC-ST
DOC-ST-R
P-INTL-U
P-INTL-L
REf.
Unit: 0.5 mm
Description
Adjusts the original stop position for top separation. Same
as DOC-ST-R.
After selecting the item, place a single original on the RDF
original tray, and press the OK key.
When the original has been fed, open the feeder, and take
note of the original on the copyboard glass.
If the original is to the left of the V marking, increase the
setting.
If the original is to the right of the V marking, decrease the
setting.
Selects sheet-to-sheet distance for top pick-up.
1) Check to make sure that '0' is set to
COPIER>OPTION>FACE-DOWN.
2) Select the item, and place two originals on the original
tray.
3) Press the OK key. The original will be fed and will be
stopped on the copyboard glass.
4) Adjust the distance between sheets.
If the distance is small, increase the setting.
If the distance is large, increase the setting.
Adjusts the sheet-to-sheet distance for bottom pick-up.
1) Check to make sure that '1' is set to
COPIER>OPTION>FACE-DOWN.
2) Select the item, and place two originals on the original
tray.
3) Press the OK key. The original will be fed and stopped
on the copyboard glass.
4) Measure the distance between sheets.
If the distance is small, increase the setting.
If the distance is large, decrease the setting.